|
Product Details:
|
Type: | UF-10KW | Max Output Power: | 10KW |
---|---|---|---|
Work Voltage: | 380V/415V/440V/480V*3Phase 50-60hz | Working Frequency: | 100-300KHZ |
Input Current: | 15A | Duty Cycle: | 100% (40 Degree Room Temperature) |
Control Way: | Infineon IGBT | Power Factor: | 0.98 |
Application: | Heating, Welding,Soldering, Melting, Annealing, Tempering, Hot Forging | Protection System: | Over Current, Over Voltage, Phase Fail, Under Voltage, Over Heat, Water Lack |
Weight: | 38KGS | Heating/Retain/Cooling Time: | 0.1-99.9S |
Heating Current: | 5-45A | ||
Highlight: | 350KHZ 10kw Induction Heater,Ultrahigh Frequency 10kw Induction Heater,350KHZ Ultra High Frequency Induction Heating Machine |
100-300KHZ 10KW Ultrahigh Frequency Induction Heating Machine
Features:
1. Frequency is high, heating speed is very fast, high efficiency and easy operation..
2. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
3. 100% Duty cycle, continuous working is allowed at maximum power output.
4. Simple to install, Installation can be done by unprofessional person very easily;
5. Diode Rectification Technology Make sure high power factory—0.98.
6. Soft Switch Technology And prefect Protection system ( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
7. Display of heating power, Power%, Current, Voltage, oscillating frequency.
8. Light weight, small Size
2 Parameter
Type | UF-10KW |
Work power | 380V*3Phase 50-60hz |
The range of operating voltage | 340-430V |
Output power | 10KW |
Input current | 15A |
Heating Current | 5-45A |
Fluctuating frequency | 100-350KHZ |
Timing (Heat time, Retain time ) | 0.1-99.9S |
The flow rate of cooling water | >0.2Mpa >5L/min |
Water temperature protection point | 40℃ |
Duty cycle | 100%(40degree room temperature) |
Weight | 38KGS |
Size | 520*260*450mm |
Application:
(A) heat treatment industry (hardening, annealing, tempering and stress relieving):
1. Hardware tools high-frequency hardening heat treatment, such as; vise, hammer, locking pliers, wrenches, screwdrivers
2. Variety of steam, motorcycle parts high-frequency hardening heat treatment, such as: crankshaft, connecting rod, piston pin, camshaft, valves, various gears within the gearbox, a variety of fork, all kinds of spline shaft, drive axle, each high-frequency hardening heat treatment of the kinds of small shafts, crank pin, rocker arm, rocker shaft
3. Hydraulic components, such as: a rotor of the plunger piston pump, rotor pump, various valves on the other to the heat treatment of high-frequency hardening of the shaft, the gear pump gears, etc.
4. Automotive, machinery and equipment, electric tools, gear, bearing high-frequency hardening heat treatment
5. Variety of woodworking tools, such as: ax, planer quenching
Wheels of a variety of automotive, motorcycle, marine and engineering equipment, machine axis IF quenching, large parts of the annealing, tempering and stress relieving.
(B) the welding industry (brazing)
1. Welding of various turning tools, planer, milling machining and cutting tools
2. Welding of various diamond tools, such as: welding diamond saw blades, diamond drill
3. Various shaped drill head column Button Bits, drill Yan briquette, riveting rod drill carbide brazed
4. Various shearer teeth welding, various digging machine cutter welding
5. Various mechanical welding tool
Air conditioners, refrigerators, refrigeration system brass brazing, pipe brazing, as well as brass and aluminum tubes brazed
(C) forging industry
1. Heat pier variety of standard parts, non-standard parts, pieces of copper, steel and aluminum parts casting and forging
2. Hardware tools such as pliers, wrenches before forging heating
3. Solder with solder tail caudal peduncle cone drill head forging
4. A extrusion molding on the stainless steel container.
(D) the precious metal smelting industry
The sample melting of steel, iron, copper, aluminum and other tests, as well as gold, silver and other precious metals smelting
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Contact Person: Ms. Joanna Bao
Tel: +86-13549425605
Fax: 86-757-85518440