DSP-HF-120KW Digital High Frequency Induction Heating Machine For Shaft, Gear, Rolling
Characteristic:
1. High Frequency, high speed Quenching/ hardening. Good for gear, shaft, pipe's hardening!
2. Touch Screen with Key and Power Switch, Full Digital display, can see work power, frequency, current, voltage and so on easy to check how machine works!
3.Digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically).
4. There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.
5. This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.
6. Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
7. 100% Duty cycle, continuous working is allowed at maximum power output..
9. Energy Saving Up to 20-30% compare with SCR machine.
10. Transformer Ratios can connect different Induction coils. Work different workpiece.
Speficiation:
| Type |
DSP--HF-100KW |
| work power |
360-480V *3phase 50HZ-60HZ |
| Input current |
150A |
| Power |
100KW |
| Working frequency |
30-80Khz |
| Working Diamater |
1-120mm for Shaft, 1-250mm for Gear |
| The flow rate of cooling water |
>0.1Mpa 14L/Min |
| Control Way |
IGBT |
| water temperature protection point |
40C |
| Product Size |
main 800x600x750 mm |
| transformer :650x450x600 mm |
| Weight |
main : 125 kg |
| transformer :88KG |
Application:
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear(orchard shear).
2. Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin,
chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Quench for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam,
chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
Advantage of Compare the SCR Parallel induction heating machine:
1. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type
2. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.
3. Easy to Using, no need adjust the main board, no need to adjust capacitor's connection when you want to work other workpiece.
4. After we debug the machine in our company, then you can use it directly. Very convenient.
5. Digital type machine, frequency, power, current can shows in the touch screen, easy to control the machine and see the working efficiency.
6. More stable performance.
7. Water Pressure and water Temperature Meter in the machine.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Your message must be between 20-3,000 characters!
