80-150Khz 160KW Ultrahigh Frequency Induction Heating Machine
Features:
1. This equipment adopts the IGBT inverter circuit, which has high load adaptability.
2. It has such features as high frequency, fast heating speed, high efficiency and easy operation.
3. As compared with other heating modes, it can significantly promote the economic benefits, improve the quality of heated work pieces and save the energy and material, alleviate labor intensity and improve the production environment
4. It has super small size, which can save the production space by 10 times
5. It is safe and reliable, and requires no equipments of ten thousand voltage,and thus can ensure the safe operation
6. The comprehensive full load design is available for 24-hour continuous operation.
7. Simple to install, Installation can be done by unprofessional person very easily;
8.Transformer Ratios can connect different Induction coils,Work different workpiece.
Specfication:
| Type |
UF-160KW |
| Work power |
360-480V *3Phase 50-60hz |
| Output power |
160KW |
| Input current |
240A |
| Fluctuating frequency |
80-150KHZ |
| The flow rate of cooling water |
0.1-0.3Mpa >10L/MIN |
| Water temperature protection point |
40℃ |
| Duty cycle |
100%(40degree room temperature) |
| Weight |
160KGS
100KGS
|
| Size |
95×53×100CM
65×34×50CM
|
Application:
(A) heat treatment industry (hardening, annealing, tempering and stress relieving):
1. Hardware tools high-frequency hardening heat treatment, such as; vise, hammer, locking pliers, wrenches, screwdrivers
2. Variety of steam, motorcycle parts high-frequency hardening heat treatment, such as: crankshaft, connecting rod, piston pin, camshaft, valves, various gears within the gearbox, a variety of fork, all kinds of spine shaft, drive axle, each high-frequency hardening heat treatment of the kinds of small shafts, crank pin, rocker arm, rocker shaft.
3. Hydraulic components, such as: a rotor of the plunger piston pump, rotor pump, various valves on the other to the heat treatment of high-frequency hardening of the shaft, the gear pump gears, etc.
Advantage:
1. CE certificated, more than 22 years experiences, high quality control and good performances.
2. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type
3. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.
4. Digital type machine, frequency, power, current can shows in the touch screen, easy to control the machine and see the working efficiency.
5. Water Pressure and water Temperature Meter in the machine.
6. Adjustable Transformer, more options for you to connect different induction coils. Will be large using for different workpiece.
Your message must be between 20-3,000 characters!
