|
Product Details:
|
| Name: | Induction Melting Furnace | Application: | Melting Iron, Steel, Copper, Brass, Alum, Bronze |
|---|---|---|---|
| Working Frequency: | 1-10KHZ | Melting Time: | Average 40 Minutes |
| Type: | MF-500KW-750KGS | Voltage: | 380V/415v/440V/480V*3Phase 50-60HZ |
| Power: | 500KW | Melting Capacity: | 750KGS |
| Input Current: | 750a | DC Current: | 1000A |
| Cooling System: | Water Cooled | Control Way: | Infineon IGBT |
| Working Way: | Auto/Manual | Melting Temperature: | 1750C/ 1550C |
| Highlight: | 750KGS Brass Induction Melting Furnace,1750C Brass Induction Melting Furnace,Induction Furnace For Copper Melting 750KGS |
||
750KGS Medium Frequency Induction Melting Furnace for Copper, Bronze, Brass
Summary:
The equipment is a frequency conversion device that converts three-phase power frequency current into a single-phase medium frequency current, through electromagnetic induction metal produced eddy current loss, and achieve the purpose of heating melting. For steel, iron, copper, aluminum, zinc, lead, ferrous and non-ferrous metal and alloy smelting, heat insulation, mainly used in the casting, melting industry.
Parameters
| Model | MF-500KW-750KG |
| work power | 380V/ 415V/ 440V*3phase 50HZ-60HZ |
| input current | 750A |
| Output Current | 1000A |
| DC Voltage | 500V |
| Fluctuating output power | 500KW |
| Melting Capacity | 750KGS |
| Melting Temperature | 1550C |
| Melting Time | 40Minutes |
| fluctuating frequency | 1-10KHZ |
| the flow rate of cooling water | 0.15-0.3Mpa |
| water temperature protection point | 40C |
| product size | 860*800*1860MM |
| 1000*1000*1320MM | |
| net weight | 420KGS |
| 480KGS |
Specifiction:
1. Low Frequency, the melting Furnace is fast and the heating efficiency is high.
2. Infineon IGBT Melting Furnace, Can save 20% electricity compare SCR parallel type.
3. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine.
4. Easy to Using, no need adjust the main board, no need to adjust capacitor's connection.
5. The intermediate frequency melting furnace is mainly composed of a power supply, an furnace body with a induction coil and a crucible. Melting metal will be put in the crucible built with refractory materials.
7. Our power supply has the insolation transformer, melting furnace’s output voltage is low, so very safe to operate our melting furnace.
8.Imported integrated circuit and power module are used to realize automatic frequency tracking. It has the characteristics of small size, light weight, high efficiency, energy saving, simple installation, high reliability and not easy to damage.
Application Intermediate frequency electric furnace is widely apply in melting non-ferrous and ferrous metal. Such as carbon steel, alloy steel, special steel, iron, copper,Brass, Bronze and aluminum, Zinc,etc.
For product: Ingots, steel rebar, Copper/Brass/Bronze billet, iron powder, auto parts, brass statues, iron pots or manhole covers, etc.
Contact Person: Ms. Joanna Bao
Tel: +86-13549425605
Fax: 86-757-85518440
