|
Product Details:
|
| Name: | Induction Soldering Machine | Type: | HF-60KW |
|---|---|---|---|
| Max Output Power: | 60KW | Work Voltage: | 380V/415V/440V/480V*3Phase 50-60hz |
| Working Frequency: | 30-80KHZ | Heating/Retain/Cooling Time: | 1-99S |
| Input Current: | 60A | Duty Cycle: | 100% (40 Degree Room Temperature) |
| Control Way: | Infineon IGBT | Power Factor: | 0.98 |
| Application: | Heating, Welding,Soldering, Melting, Annealing, Tempering, Hot Forging | Protection System: | Over Current, Over Voltage, Phase Fail, Under Voltage, Over Heat, Water Lack |
| Highlight: | PLC Diamond Induction Brazing Machine,Induction Brazing Machine 60A,60A High Frequency Induction Heating Machine |
||
Diamond and Carbide Brazing Machine 60A High Frequency Induction Heating Machine
Main characteristics:
1. Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2. 100% Duty cycle, continuous working is allowed at maximum power output.
3 Simple to install, Installation can be done by unprofessional person very easily;
4. 100% Duty cycle, continuous working is allowed at maximum power output.
5. Energy Saving Up to 20-30% compare with SCR machine.
6. Diode Rectification Technology Make sure high power factory—0.98.
7. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
8. Display of heating power, Power%, Current, Voltage, oscillating frequency.
9. Light weight, small Size
10. Transformer Ratios can connect different Induction coils,Work different workpiece.
11.Large working application, annealing, quenching/Hardening, Hot Forging, Heating Treatment, Soldering/Welding/Brazing and melting.
Parameter
| Model | HF-60KW |
| work power | 380V*3Phase 50-60Hz |
| input current | 60A |
| fluctuating frequency | 30-80kHZ |
| the flow rate of cooling water | 0.15-0.3Mpa |
| water temperature protection point | 40C |
| product size | Main parts:675*325*655mm |
| transformer: 530*300*475mm | |
| net weight | main : 53 KGS |
| transformer :38KGS |
Application: Brazing, Soldering, Welding All kinds of Diamond, Silicon Carbide, Copper, brass fittings, Pipes, Plate and so on.
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Contact Person: Ms. Joanna Bao
Tel: +86-13549425605
Fax: 86-757-85518440
