Copper Brass Induction Soldering Machine 30-80Khz High Frequency Induction Heating Machine

Copper, Brass, Bronze Tube Soldering Machine 30-80Khz High Frequency Induction Heating Machine

Main  Features:

1. Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2. Simple to install, Installation can be done by unprofessional person very easily;

3. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, tdo realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability!

4. 100% Duty cycle, continuous working is allowed at maximum power output.

5. Energy Saving Up to 20-30% compare with SCR machine.

6. Diode Rectification Technology Make sure high power factory—0.98.

7. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
 

Technical Parameters: 

Usage:

1. Small rod billet heating, heating temperature can be up to 1500 degree C.
Widely used for wrought iron heating, small bolts and nuts making etc.

2. Welding for carbide tips, metal tube, alloy cutter, Solder the Copper, brass, Bronze Tube. 

3. Melting Gold, Silver, Steel, Iron, Stainless Steel, Alum, copper and so on.

4. Annealing steel, iron, copper wire and pipe,plate and Bar.

5. Tempering all kinds of the metal.

6. Hardening,Quenching All kinds of the shaft, gear, pipe and so on  

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.