45A Steel Ring Annealing Induction Heating Machine
Main Characteristic:
Our induction heat treatment process is best suited for enhancing the ductility of steel, Copper, stainless steel, and carbon steel parts without compromising on the dimensional stability of the materials. In addition, our induction heating process is environmentally friendly and offers higher heating intensity compared to conventional metal treatment techniques.Widely use for metal forging,hardening,welding,brazing,melting,annealing,shrink fitting and etc.
1. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2.100% Duty cycle, continuous working is allowed at maximum power output.
3. Simple to install, Installation can be done by unprofessional person very easily;
4. 100% Duty cycle, continuous working is allowed at maximum power output.
5. High Efficiency Up to 98%. Diode Rectification Technology Make sure high power factory—0.98.
6. Energy Saving Up to 20-30% compare with SCR machine.
7. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
8. Display of heating power,Heating Current, Voltage, oscillating frequency.
9. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
Parameters:
| Type |
SF-30KW |
|
| Work power |
3×380V(415V,440V,480V)50-60HZ |
|
| The range of operating voltage |
340V-430V(370-480)V AC
|
|
| Output Fluctuating power |
30KW |
|
| Fluctuating frequency |
20-50KHZ |
|
| Max Input Current |
45A |
|
| Timing (Heat time, Retain time,Cool time) |
1-99S |
|
| The flow rate of cooling water |
0.08-0.16 Mpa 12L/Min |
|
| Water temperature protection point |
40℃ |
|
| Duty cycle |
100%(40degree room temperature) |
|
|
Weight
And
Size
|
Net |
Main part: L560*W230*H480 25KGS
Transformer: L360*W205*H350 20KGS
|
|
| With Package |
Main part : L630*W300*H600 35KGS
Transformer: L420*W300*H550 28KGS
|
|
|
Applications:
Heat treatment Quenching Forging Melting Soldering and brazing Welding
|
Application
1. Annealing of various stainless steel products, such as stainless steel basin, annealed and extruded can, annealed folded edge, annealed sink, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces, such as golf ball head, cue, brass lock, hardware copper fitting, kitchen knife handle, blade, aluminum pan, aluminum pail, aluminum radiator and various aluminum products.
Advantage:
1 Brand New Infineon IGBT Using
2 DELIXI Air Switch
3 Phase Bridge (Janpan Fuji or Germany IXYS)
4 Filter Capacitor (Janpan chemi-con)
5 All screws are Stainless Steel
6 More than 22 year experience, rich experience, stable performance, good quality.
After Sales Service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Your message must be between 20-3,000 characters!
