MF-120KW Induction Forging Bar Stock Machine Industrial Process

MF-120KW Induction Forging bar Stock machine industrial process:

Specification:

Features:

1. Non-contact Heating is the biggest Characteristic of the induction heating.

2. High Frequency, Heating is fast, good for quenching all kinds of shaft, pipe, gear, lead Guide, Sprock and so on.

3. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
4. 100% Duty cycle, continuous working is allowed at maximum power output.
5. Simple to install, Installation can be done by unprofessional person very easily;

6. Double digital Screen display, better to know the working performance of the machine!

7. Energy Saving Up to 20-30% compare with SCR machine.

8. Diode Rectification Technology Make sure high power factory—0.98.

9. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.

Application:

Advantage

1. Using the third generation Infineon IGBT.

2. DELIXI Air Switch

3. All screws in our machine are stainless steel.

4. Phase Bridge (Germany IXYS)

5. Water Temperature and water Pressure meter in the machine,double protection for the machine.